Note: Soldering three fuse caps simultaneously
Objective:
Soldering three fuse caps simultaneously to reflow lead free solder and make a joint between the fuse cap and fuse wire guide
End Product:
fuses
Equipment:
Ambrell 10 kW induction heating system, equipped with a remote workhead containing two 1.0µF capacitors for a total of 0.5µF An induction heating coil designed and developed specifically for this application
Materials:
Plated copper end caps 0.375” (9.5mm) OD x 0.375” (9.5mm) height, ceramic fuse tube 1.5” tall (38.1mm) , lead free solder preforms
Temperature:
700 ºF (371 ºC)
Frequency:
286 kHz
Testing:
A three position two turn helical coil is used to solder three fuse caps simultaneously. The fuse assemblies are placed in the coil and the heat is applied in three cycles at 3.5 seconds per cycle to reflow the solder. On the production line the bottom caps are soldered first. The fuses are filled with sand and without flipping the assembly the top cap is soldered.
Benefits:
Induction heating provides:
-
Consistent, repeatable results
-
Precise & accurate heat application
-
Hands-free heating that involves no operator skill for manufacturing
-
Even distribution of heating

Visit our Applications Lab to learn more about free applications testing.
1655 Lyell Ave, Rochester, NY 14606 USA | Tel: +1 585 889 9000