Note: Soldering a copper tube to a brass flow valve

Objective:

To heat a copper tube and a brass valve to 356 °F for a brazing application

End Product:

flow valve

Equipment:

Ambrell EASYHEAT 9kW 150-400 kHz induction heating system equipped with a remote work head containing two 1.5 μF capacitors  A single-position two-turn C-shaped induction heating coil designed and developed specifically for this application

Materials:

Copper tubes (various sizes), Brass valves (various sizes), Solder, General purpose, flux

Temperature:

358 °F (180 °C)

Frequency:

258 kHz

Testing:

The assembly was placed into the induction heating coil and the power was turned on. After 12 seconds solder was fed to the joint of the assembly. Flux core tin lead solder was used for this application. With a 9kW EASYHEAT, the assembly heated to 358 °F within 12 seconds

Benefits:

  • Speed: The heating process was completed within 12 seconds and proved to be faster than the client"s gas torch

  • Repeatability: Induction is a repeatable heating process, while gas torches are generally less dependable which can impact part quality

  • Safety: Induction does not present a flame, so it helps create a safer, cooler working environment

Soldering a copper tube to a brass flow valve

Visit our Applications Lab to learn more about free applications testing.
1655 Lyell Ave, Rochester, NY 14606 USA | Tel: +1 585 889 9000