Induction Curing

Induction Curing

How Does Induction Curing Work?

Induction heating provides a better solution for adhesive curing than air curing, hot fan curing or curing in large ovens which must be run continuously. Induction is used to heat the metallic material on which the curing adhesive has been applied 

Induction generates an electromagnetic field in a work coil that induces currents in the conductive material of a workpiece placed within or near the coil. Friction from these currents elevates the temperature of the workpieces to be heated.

Contact Us

Benefits of induction curing

  • Meets tight production tolerances with precise localized heat to small areas creating pinpoint accuracy

  • Increases production rates with faster heating cycles

  • Reduces defect rates with repeatable, reliable heat

  • Eliminates variability from operator-to-operator, shift-to-shift

  • Maintains metallurgical characteristics of the individual metals

curing-thumb

Select from our collection of curing notes, taken from years supporting our customers. Read how we helped to solve their process heating challenges.


image: Curing Oil Filters for Agricultural EquipmentCuring Oil Filters for Agricultural Equipment

To heat steel parts for a curing application; the end-product was an oil filter for agricultural equipment.

image: Curing coatings; steel tube, aluminum blockCuring coatings; steel tube, aluminum block

The client's oven had a heating time of 20 minutes, so the time savings from a 90-second cycle are considerable. Additionally, induction is a repeatable process, unlike an oven and the induction system takes up less floor space than an oven.

image: Curing Epoxy On A Laser Diode AssemblyCuring Epoxy On A Laser Diode Assembly

To heat epoxy on a laser diode assembly to 250°F within 5 seconds for a curing application

image: Curing plastisol adhesive; ends of filter assemblyCuring plastisol adhesive; ends of filter assembly

Induction heating provides improved distribution of heat, much faster cure time than heat plates previously used, much faster production rate and hands-free heating that involves no operator skill for manufacturing

image: Curing a coating; both sides aluminum pistonCuring a coating; both sides aluminum piston

A three turn channel coil 19 (48.26cm) long is used to anneal 4 pistons running though the coil with a distance of 6 (15.24cm) between centers.

image: Curing epoxy on aluminum copier roller assemblyCuring epoxy on aluminum copier roller assembly

A four turn helical pancake coil is used to heat the end of the copier roller assembly. The assembly is heated 90 seconds to cure the adhesive.

image: Curing plastisol adhesive on an aluminum filter assemblyCuring plastisol adhesive on an aluminum filter assembly

A four turn helical coil is used to cure the plastisol adhesive. One filter end cap is filled with adhesive, attached to the filter and heated 90 seconds to cure the adhesive.

image: Curing ink on aluminum bottle capsCuring ink on aluminum bottle caps

A double channel coil is used for the ink drying application. Fifteen bottle caps are placed inside the coil and power is applied for 3 seconds to dry the ink.

image: Curing Alumium Car MoldingCuring Alumium Car Molding

Automotive manufacturers are constantly searching for cost-effective production technologies.

image: Curing Ceramic FiberCuring Ceramic Fiber

A special steel tube and coil combination is used to build an induction heating oven to cure the fiber on a continuous basis. The ceramic fiber travels in an alumina tube inside a hot steel tube

image: Curing Speaker Cone EpoxyCuring Speaker Cone Epoxy

Induction heating provides minimized coating defects, repeatable results and faster production times

image: Curing the Inside Liner of Baby Food Bottle TopsCuring the Inside Liner of Baby Food Bottle Tops

A three turn oval pancake coil is used to cure the inside liner of a baby food bottle cap. The bottle cap travels through the coil at 25 per second to cure 500 caps per minute.

image: Bonding Rear View Mirror Brackets to Windshield GlassBonding Rear View Mirror Brackets to Windshield Glass

A unique four-over-four double wound pancake coil is used for the bonding application.

image: Curing Adhesive on Steel Motor Shaft for BondingCuring Adhesive on Steel Motor Shaft for Bonding

A complex two coil system, shield and stud systems used to provide proper axial alignments of the shaft & coil while allowing the fixture to be open for removal of the shaft.

image: Curing Measuring Tape PaintCuring Measuring Tape Paint

The Ambrell 20kW output solid state induction power supply along with a unique 30 inch long multi turn helical coil was found to produce the following results.

Popular Curing Note

Popular Curing Video

Four Ways To Contact Ambrell for Support

AMBRELL CORPORATION

1655 Lyell Avenue
Rochester, NY 14606
United States
 

Directions to Ambrell Corporation Directions

T: +1 585 889 9000

F: +1 585 889 4030

Contact Sales

Contact Orders

Contact Service

S: +1 585 889 0200

AMBRELL B.V.

Holtersweg 1
7556 BS Hengelo
The Netherlands
 

Directions to Ambrell B. V. Directions

T: +31 880 150 100

F: +31 546 788 154

Contact Sales

Contact Orders

Contact Service

AMBRELL Ltd.

Unit 6, Space Business Centre
Tewkesbury Road
Cheltenham, GLOS, GL51 9FL
United Kingdom

Directions to Ambrell Ltd.Directions

T: +44 1242 514042

F: +31 546 788 154

Contact Sales

Contact Orders

Contact Service