Wählen Sie aus unseren kostenlosen Anwendungshinweisen
Sehen Sie, wie wir unsere bemerkenswerten Induktionserwärmung Lösungen eingesetzt haben, um die Herausforderungen unserer Kunden zu lösen.
Fuse thermoplastic catheter tubes
Heating of the mandrel is from the inside out providing a smooth finish on the outside of the assemblies.
Heating Catheter Tipping DieTo heat an aluminum catheter tipping die to above 285 °F within 2 to 5 seconds for the forming of catheter material.
Heating a catheter tipping die
A two turn plate concentrator coil is used to heat the die. To measure the temperature on the ID and establish the time-to-temperature relationship...
Molding a teflon catheter tipHeat a water-cooled steel mandrel to 700 °F (371 °C) to form a high quality Teflon catheter tip.
Plastic Reflow With Catheter Tubing
Heat a metal braid in a plastic catheter tube to 250 °F (121.1 °C) so that another catheter tube can be bonded to it.
AMBRELL CORPORATION
1655 Lyell Avenue
Rochester, NY 14606
United States
F: +1 585 889 4030
AMBRELL B.V.
Holtersweg 1
7556 BS Hengelo
The Netherlands
F: +31 546 788 154
AMBRELL Ltd.
Unit 6, Space Business Centre
Tewkesbury Road
Cheltenham, GLOS, GL51 9FL
United Kingdom
F: +31 546 788 154