Ambrell Blog

Industry 4.0 Report Now Available

Manufacturers are creating smart factories across the globe with impressive throughput and enhanced...

1 min read

Induction Brazing Fishhooks

A client came to THE LAB at Ambrell needing to heat two pairs of fishhooks inside a steel tube for...

1 min read

Induction Brazing Copper Busbars

A client in the high voltage contracting business wanted to move away from flame heating, so they...

1 min read

Bonding Automotive Trim Vinyl Covering

Objective A client contacted THE LAB at Ambrell needing to heat aluminum molding to activate an...

1 min read

Induction Bonding Solar Panel Shingles

Objective A client needed to heat the stainless-steel substrate of a solar panel shingle in order...

1 min read

Shrink Fitting a Carbon Graphite Ring Insert Into an Outer Steel Band

A client contacted THE LAB at Ambrell needing to heat a steel band to 1000 ºF (538 ºC) and insert a...

1 min read

Induction Tempering a Spring

A client contacted THE LAB at Ambrell because they needed to temper a spring by heating it to 300...

1 min read

Shrink Fitting Automotive Turbo Charger Impeller Blades onto an Aluminum Shaft

A client contacted THE LAB at Ambrell needing to heat aluminum impeller blades to 200 ºF (93 ºC)...

1 min read

Ambrell’s First System Retired After Nearly 35 Years of Service

Ambrell Corporation, an inTEST Company and a leading manufacturer of induction heating solutions...

1 min read

Induction Shrink Fitting Steel Tubes

A client contacted THE LAB at Ambrell needing to heat steel tubes to 500-1000 ºF (260-538 ºC) for a...

1 min read

Induction Shrink Fitting a Motor Shaft and Roller

A client contacted THE LAB at Ambrell needing to heat a roller assembly to shrink fit it to a motor...

1 min read

Hermetic Sealing of Stainless-Steel Rods with Glass Preforms

THE LAB at Ambrell tested an application that involved heat sealing both ends of a stainless-steel...