Brett Daly

Induction Forging a Steel Part with a Flange in 20 Seconds

A client attempted to cold forge a steel part with a flange, but wasn't getting the desired...

Ambrell Sells EKOHEAT for Automotive Application

Ambrell has sold an EKOHEAT 15 kW/100 kHz induction heating system for a metal-to-plastic insertion...

1 min read

Induction Soldering Four Copper Strips Concurrently | Ambrell

A client had been soldering two copper strips at the same time but wanted to increase their...

1 min read

BIHE Int'l Trading (Shanghai) Co. Becomes a Lvl. 3 Partner in China

Ambrell Corporation, a leading source of innovative induction heating solutions worldwide,...

1 min read

Induction Brazing Steel Wire Braided Hoses for Ease & Efficiency

A client needed to braze a steel tube with external wire braid to manufacture an aerospace part and...

1 min read

Induction Metal-to-Plastic Insertion for Magnetic Steel Inserts

A client approached THE LAB at Ambrell looking to insert magnetic steel inserts into a plastic part...

Improving Steel Cutting Bit Quality with Diamond-Carbide Inserts

A client had been using an inexpensive imported induction heating system, but ran into quality...

1 min read

Induction Seals for Plastic Bottles - Cap Sealing in Under 2 Sec.

The objective of this application was to heat an aluminum seal for cap sealing to a plastic...

1 min read

Brazing or Welding -- Which Joining Method Should I Use?

If you require metal joints that are strong and permanent, brazing and welding are probably your...

1 min read

Ambrell Sells EASYHEAT for Soldering Application

Ambrell, a leading manufacturer of induction heating systems, has sold an EASYHEATTM 6 kW, 150-400...

1 min read

Induction Melting Iron for Powdered Metal Analysis

A manufacturer of metal powders needed to harness the benefits of induction to melt iron powder....

1 min read

Frank Kuster: Leading THE LAB in the Netherlands

Ambrell delivers performance excellence because of our people. We'll highlight some of our...